Sunday 28 August 2016

Another quick and easy card created for Chocolate Baroque

Good morning. Today I have another quick and easy card to share – made in under 15 minutes. I had to make a couple of samples in a last minute hurry for Lesley Wharton’s recent TV shows on The Craft Channel. I hope that you like it.

On the Chocolate Baroque DT Blog are more quick makes from my Teamies today.

Materials:
  • Flora Musica stamp
  • 14.5 X 17cm white card blank, white stamping card, dark pink card
  • Distress Inkpad (Black Soot)
  • Watercolour pencil (dark pink)
  • Watercolour brush
  • Decorative oval layering dies (Tonic Elegant Oval)
  • Organza ribbon (pink)
  • Black alcohol marker (Spectrum Noir)
  • Glitter glue (silver)
How to make it:
  1. Stamp the image with Distress Ink. Using the pink pencil scribble some colour onto the flowers and leaves. Brush over the image with a damp brush to shade and colour.
  2. Cut out the image using the decorative oval. Edge with Distress Ink and with the black marker. Glue onto pink card and cut around to create a mat. Again edge with black pen.
  3. Glue a strip of pink card and ribbons onto the card blank. Glue on the topper. Finish with a little glitter glue in the flower centres.

Quick and Easy Floral card created for Chocolate Baroque

Good morning. Today I have a quick and easy card to share – made in under 15 minutes. I had to make a couple of samples in a last minute hurry for Lesley Wharton’s recent TV shows on the Craft Channel. I hope that you like it.

On the Chocolate Baroque DT Blog are more quick makes from my Teamies today.

Materials: How to make it:
  1. Colour the stamping card quickly with aquatints (or use Brusho’s, watercolours or spritzer inks) dropping colours on ‘wet in wet’. Blot off excess with kitchen towel and dry with a heat gun.
  2. Dust the surface with talc, antistatic powder or corn flour. This stops the embossing powder sticking where you don’t want it. Stamp the image with Versamark. Heat emboss with the black sparkle powder.
  3. Colour parts of the image quickly with the glitter pens and add highlights with the white pen (just ‘scribble’ quickly around the flower petal edges).
  4. Outline the card with black marker, glue and mount to the card front.

Tuesday 16 August 2016

Summer T-Shirt decorated using Tattered Lace dies to create stamps and stencils

Good evening. I hope that you like my summer themed project. You may of seen my stamped and decorated summer top in my last posting. This time I have created a variation using dies to create the stamps.
I designed this to showcase how dies can be used to create stamps by cutting from funky foam. Stencils can also be created by cutting acetate or plastic stencil sheet.
Use the coordinating stamps or stencils to complement die cuts on cards, or use them to decorate fabrics for sewing projects, or to decorate ready made items.


Front


Back


Decorated tag to match

Materials:
*I used Vallejo fabric paints (Green, Metallic Turquoise, Bengali Rose, Parma Violet, Blue and Black) plus Martha Stewart Multi Surface paint (Spring Pasture) and Pinflair Glitter Wand.
Note: If you want to stamp onto a darker coloured fabric you will need to use opaque fabric paints specially formulated for dark fabric. IMPORTANT NOTE: I was assured that the Pinflair glitter wand was suitable and fixable on fabric (after heat fixing) but mine has just washed out - eek! I will find another glitter glue suitable and let you know when I find an alternative.
How to do it:
Prewash the shirt in plain soap to remove any fabric treatments or conditioners (I use ordinary dish washing liquid). Dry and iron to give a smooth stamping surface.


Load the paints onto the CutNDry foam and work in well with a palette knife. Place them sponge side down onto a palette (I used a piece of waste packaging) and lightly spritz with water to keep them damp. While not using I also place a damp cloth over the top. This keeps the paints useable while working on your project. I have found this to be the best method for getting nice crisp stamping without paint clumping or drying out. They will even keep overnight if placed in a plastic bag.


Use the dies to cut funky foam shapes. Apply Zig 2 Way glue and leave to go tacky (this glue is blue on application and dries clear to give a repositionable tacky surface). Mount stamps onto acrylic blocks for stamping.
Cut the butterflies from waste acetate and use the apertures as a stencil.
Stamp the butterflies onto copy paper and cut around the outer edge to create masks for stamping.
Wash stamps immediately after use (or place face down on a wet cloth until ready to clean).


Lay some plastic sheeting inside the shirt to protect any paint from seeping through layers (i.e. front to back) while stamping. I placed my glass mat inside the shirt while working. Stencil the butterfly silhouettes with multi colours. Dry. A hair dryer is useful to help speed up the drying process while working (the paints do dry quite quickly).
Stamp the butterfly details over the top of the silhouettes using black paint.
Stamp the foliage using paper masks to protect the butterfly images.
Finally add glitter glue to the butterflies on the shirt front.
Leave overnight for the paints to fully cure and then iron fix the paints on the reverse to make them permanent and washable.




Monday 15 August 2016

Summer T-Shirt created for Chocolate Baroque


Good morning. I hope that you like my summer themed project. I decided to revamp a plain T shirt top with foliage and butterflies.
Front
Back

Close up

Materials:
  • Wild Meadow, Butterfly Blush and Just Butterflies stamp sets
  • Iron fix fabric paints (green, lime, metallic turquoise, pink, violet, blue, black) and glitter glue for fabric (green/gold)*
  • Light coloured smooth knit T-shirt (turquoise)
  • CutNDry foam, water spritzer bottle
  • Waste copy paper
I used Vallejo fabric paints (Green, Metallic Turquoise, Bengali Rose, Parma Violet, Blue and Black) plus Martha Stewart Multi Surface paint (Spring Pasture) and Pinflair Glitter Wand.  IMPORTANT NOTE: I was assured that the Pinflair glitter wand was suitable and fixable on fabric (after heat fixing) but mine has just washed out - eek! I will find another glitter glue suitable and let you know when I find an alternative.
Note: If you want to stamp onto a darker coloured fabric you will need to use opaque fabric paints specially formulated for dark fabric.

How to do it:
Prewash the shirt in plain soap to remove any fabric treatments or conditioners (I use ordinary dish washing liquid). Dry and iron to give a smooth stamping surface.


Load the paints onto the CutNDry foam and work in well with a palette knife. Place them sponge side down onto a palette (I used a piece of waste packaging) and lightly spritz with water to keep them damp. While not using I also place a damp cloth over the top. This keeps the paints useable while working on your project.  I have found this to be the best method for getting nice crisp stamping without paint clumping or drying out. They will even keep overnight if placed in a plastic bag.

Stamp the butterfly silhouettes onto copy paper and cut out to create masks for stamping. Wash stamps immediately after use.
Lay some plastic sheeting inside the shirt to protect any paint from seeping through layers (i.e. front to back) while stamping. I placed my glass mat inside the shirt while working. Stamp the butterfly silhouettes with multi colours. Dry. A hair dryer is useful to help speed up the drying process while working (the paints do dry quite quickly).
Stamp the butterfly details over the top of the silhouettes using black paint.



Stamp the foliage using paper masks to protect the butterfly images.
Leave overnight for the paints to fully cure and then iron fix the paints on the reverse to make them permanent and washable.